
Anti-Corrosion Coatings
Rust, salt spray, UV and industrial exposure destroy unprotected steel. We specify and supply Noxyde and Rust-Oleum coating systems that stop corrosion at the source and keep critical structures protected for decades — often applied straight over prepared rust.
Noxyde
paint over rust
9100
epoxy mastic
9800
urethane topcoat
3800
water-based acrylic
Expert
specification
Stopping rust before it costs you the asset
New Zealand's coastal environment is tough on metal. Salt-laden air, high UV, driving rain and condensation accelerate rust. Our anti-corrosion coatings are specified for bridges, ports, airports, industrial plant, tanks, pipes, structural steel and marine assets — anywhere failure would be expensive or dangerous.
Whether the job is a rusting roof, a steel bridge handrail, an industrial tank or a silo, we match the right coating to the surface, exposure and maintenance window. We can also advise on surface preparation, application method and inspection so the coating performs as intended for the long term.
Why contractors and asset owners come to us
- Applied directly to prepared rust — no separate primer needed
- Proven in coastal salt, high UV and industrial exposure
- Systems for steel, concrete, aluminium and galvanised surfaces
- Backed by 30+ years of New Zealand specification experience
Coatings that stop corrosion
Four proven anti-corrosion coatings — Noxyde plus Rust-Oleum 9100, 9800 and 3800 — specified individually or together as a complete system.
NoxydeNoxyde Anti-Corrosion Coating
Paint straight over prepared rust, stopping corrosion for decades.
Noxyde is the only anti-corrosion waterproofing membrane on the market that can be applied directly over clean, prepared rust — no separate primer required. For over 29 years it has protected New Zealand's most severe coastal environments, from saltwater estuary bridges to iconic steel roofs. It is also used to extend the life and safely encapsulate asbestos roofs, locking fibres in place and adding decades of waterproof protection without the cost of removal.
Learn more
Rust-Oleum9100 Epoxy
One epoxy. Every surface. Every condition.
Rust-Oleum 9100 is a proven swimming pool paint applied to New Zealand's largest commercial pools right through to thousands of backyard owners. It is also the same versatile epoxy used on some of New Zealand's biggest steel constructions — direct to metal, concrete and prepared floors. Because every job is different, speak with one of our team first and we will specify the right system, activator and finish for your exact surface.
Learn more
Rust-Oleum9800 ROCThane Urethane Mastic
Fights rust while holding its colour and gloss.
An aliphatic acrylic urethane direct-to-metal mastic engineered for the ultimate in long-term appearance. Ideal where an asset must look as good as it performs in aggressive coastal and industrial environments.
Learn more
Rust-Oleum3800 DTM Acrylic Enamel
Fast-dry, low-VOC, water-based protection for metal.
The 3800 System DTM Acrylic Enamel is a fast-drying, water-based, low-VOC acrylic finish for interior and exterior direct-to-metal applications where speed and low odour matter.
Learn moreProven where failure isn't an option
From tropical airports metres from the ocean to landmark steel structures and industrial silos — these jobs relied on the same coatings we can specify for yours.

Hapuawhenua Viaduct
One of New Zealand's most recognisable railway viaducts protected with Rust-Oleum Noxyde® — a flexible anti-corrosion coating for structural steel.
Read the project
Nadi International Airport
A tropical international airport metres from the ocean, protected with Noxyde — proven where failure isn't an option.
Read the project
Auckland Airport Flagpole
New Zealand's tallest flagpole protected with Rust-Oleum 9100 epoxy and a 9800 polyurethane architectural topcoat.
Read the project
Flour Mill Silo Waterproofing
Water tracking between steel silos and their concrete plinths sealed permanently with MMP Panel Bond Bandage and Rust-Oleum Noxyde®.
Read the projectExplore more coatings and projects
Other products and applications that protect New Zealand roofs, steel, pools and floors.
EagleEagle DoubleCoat Liquid Waterproofing Aluminium
Built for water that never drains away.
A liquid elastomeric waterproofing membrane reinforced with microfibres and a high aluminium content, for waterproofing and continuous ponding water — i.e. internal gutters. Eagle DoubleCoat provides waterproofing and solar reflection on most types of roof surface including galvanised steel, iron, zinc, asbestos, cement, roofing felt, asphalt and bituminous roof coatings.
Learn more
Fillcoat®Fillcoat® Fibres Instant Waterproofing
Stop the leak today — no plumber required.
Fillcoat® Fibres repairs holes and cracks up to 2mm instantly, even in the wet. Faster and considerably cheaper than a call-out, and it stays flexible through the seasons.
Learn more
ProjectTitirangi Asbestos Roof
A weathered hexagonal asbestos-cement roof fully encapsulated with Rust-Oleum Noxyde® — instead of costly removal and replacement.
Read the project
ProjectFlour Mill Silo Waterproofing
Water tracking between steel silos and their concrete plinths sealed permanently with MMP Panel Bond Bandage and Rust-Oleum Noxyde®.
Read the project
ProjectOrewa Community Hall
A weathered torch-on bitumen membrane roof restored with MMP Panel Bond Bandage and Rust-Oleum Noxyde® — a full replacement avoided.
Read the project