All productsNoxyde · Waterproofing

Noxyde Asbestos Encapsulation System

Noxyde Asbestos Encapsulation System
20+ years
Roof life added
Avoided
Asbestos removal
Inspect first
Process
Why people choose it

Keep the roof. Lock the fibres in.

Rather than the cost and disruption of removal, ageing asbestos-cement roofing can be encapsulated with a thick, flexible Noxyde membrane — sealing fibres in place and adding decades of waterproof service life.

Problems it solves

  • Asbestos roofs that are too costly or disruptive to remove
  • Porous, weathered asbestos-cement sheeting leaking into buildings
  • Compliance pressure without a replacement budget

Where it's used

Industrial roofingFarm and rural buildingsWarehousingSchools & institutions
For applicators & specifiers

Technical data

Everything technical for Noxyde Asbestos Encapsulation System, in one place.  

Quick specs

System
Wash, biocide treatment, two-coat Noxyde membrane
Assessment
Exterior inspection by an approved asbestos consultant
Film build
Minimum 400 microns dry across the sheet
Colour
Full colour range including cool roof options

Need the full technical data sheet, safety data sheet or a written specification? Request it here.

Keep exploring

Often specified together

Products and projects that solve the same problem.

Noxyde Anti-Corrosion CoatingNoxyde

Noxyde Anti-Corrosion Coating

Paint straight over prepared rust, stopping corrosion for decades.

Noxyde is the only anti-corrosion waterproofing membrane on the market that can be applied directly over clean, prepared rust — no separate primer required. For over 29 years it has protected New Zealand's most severe coastal environments, from saltwater estuary bridges to iconic steel roofs. It is also used to extend the life and safely encapsulate asbestos roofs, locking fibres in place and adding decades of waterproof protection without the cost of removal.

Learn more
Panel Bond Waterproofing & Flashing BandageMMP

Panel Bond Waterproofing & Flashing Bandage

Seal joints, flashings and laps — permanently.

Used by our contractors as a joint sealant in cool stores, as a remedial fix for roof flashings, and across the waterproofing industry wherever a durable, flexible bandage seal is needed.

Learn more
Fillcoat® Fibres Instant WaterproofingFillcoat®

Fillcoat® Fibres Instant Waterproofing

Stop the leak today — no plumber required.

Fillcoat® Fibres repairs holes and cracks up to 15mm instantly, even in the wet. Faster and considerably cheaper than a call-out, and it stays flexible through the seasons.

Learn more
Before and after of the Orewa Community Hall membrane roof restored with NoxydeProject
Orewa, Auckland — membrane roof restoration

Orewa Community Hall

A weathered torch-on bitumen membrane roof restored with MMP Panel Bond Bandage and Rust-Oleum Noxyde® — a full replacement avoided.

Read the project
Steel flour mill silo in Tauranga masked and prepared for a Noxyde waterproof coatingProject
Tauranga — industrial waterproofing

Flour Mill Silo Waterproofing

Water tracking between steel silos and their concrete plinths sealed permanently with MMP Panel Bond Bandage and Rust-Oleum Noxyde®.

Read the project
Aerial view of the restored white standing seam roof at Hayes Common, Hamilton EastProject
Hamilton East — standing seam roof restoration

Hayes Common Cafe

A weathering standing seam long run metal roof restored with Rust-Oleum Noxyde® — replacement avoided and service life significantly extended.

Read the project