MENU

With crack bridging Fibres for holes and cracks.

Fillcoat® Fibres Repairs holes and cracks up to 2mm instantly and is faster and considerably cheaper than calling the plumber. It has excellent adhesion qualities to a wide variety of substrates and can be applied in all weather conditions

• COMES IN 1 & 5 LITRE PACKS.

• APPLY BY BRUSH OR SPACULAR DIRECTLY TO SURFACE.

• CAN BE APPLIED UNDER WATER AND STOPS LEAK IN ITS TRACKS.

• CONTAINS FIBRES FOR BRIDGING RUST 10MM RUST HOLES.

• SEAL TIN AFTER REPAIR, READY FOR NEXT JOB.

• CAN BE PAINTED OVER AFTER FULL CURING PERIOD.

• HAS 1300% ELASTICITY

Specifications

DESCRIPTION

Instantly waterproof elastic paint with crack-bridging fibres for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc.

RECOMMENDED USE

Waterproof finish of roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. Product is recoatable with Dacfill, Coating PRT or Dacfill HZ.

TECHNICAL DATA

  • Density: 1.03 kg/l
  • Gloss Level: Satin
  • Solids content in volume: 43%
  • Solids Content in weight: 52%
  • DRYING TIMES AT 20°C/RH 50%

Dry to recoat: 3 – 14 days with the same product. 6 weeks with a paint

RECOMMENDED WET FILM THICKNESS

  • 1000 μm

RECOMMENDED DRY FILM THICKNESS

  • 430 μm

THEORETICAL CONSUMPTION

  • 1 coat of 1.5 l/m²

PRACTICAL CONSUMPTION

Practical coverage depends on many factors such as porosity and roughness of the substrateand material losses during application.

SURFACE PREPARATION

Remove dust, mud, grease, moss and withered leaves carefully. The spots to be repaired are cleaned with a hard broom and sponged.

After cleaning, Fillcoat Fibres can be applied directly on bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, tiles, etc.

Porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Primer 44HS. In case of repeatedly repaired spots, important or active cracks, apply Fillcoat

Fibres crosswise over the cracks or fissures. Consumption: 1,5 kg/m² with a hawk or a block brush.

DIRECTIONS FOR USE

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONS

Can be applied during all weather conditions, except for snow.

APPLICATION & THINNING: BRUSH

  • Do not dilute.

CLEANING OF EQUIPMENT / SPILLS

  • Thinner 22 or white spirit.

REMARKS

Never apply Fillcoat Fibres to polystyrene insulation or onto new concrete (concrete should beat least 2 year old). Do not apply Fillcoat Fibres as priming coat under Dac Hydro Alu.

SAFETY DATA

  • VOC level: 485 g/l
  • VOC readymix: 485 g/l
  • VOC category: A/i
  • VOC limit: 500 g/l
  • Flashpoint: 40 °C

Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.

SHELF LIFE

5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.