MENU

flameco

FLAMENCO is a plasticised bitumen waterproof coating designed for extreme conditions.

Containing top quality filling materials such as Welsh Slate, elastomeric additives (SBS polymers) strong fibres (Inorphil) and latex, the product is very easy to use and can be broom applied directly to most building substrates as a waterproofing barrier.
All Flamenco products, can withstand continuous submersion all year round and are very popular for roof coatings and waterproofing solutions.
See projects using Flamenco coating here

FLAMENCO HYDROFIL

A thick, troweling-grade bituminous filler, contains plasticizers to ensure flexibility and water-dispersing additives to allow application on wet porous surfaces. Ensure non porous surfaces such as butyl rubber and steel, are completely dry before application. Hydrofil does not have good UV resistance, and should be top coated with Aluminium Flamenco that has excellent UV resistance.

  • Product Packaging: 10 kg printed drums.
  • Application: Drum: Apply straight from the drum with a trowel.
  • Application Temperature: 1°C – 39°C.
  • Applied Temperature: -20°C – 90°C.
  • Coverage Rate: As a filler, volume is more appropriate. 10 kg Hydrofil will fill approximately 9.5 litres.
  • Drying/Curing Time: 12 hours (full cure 2-3 days).
  • Storage: Several years in unopened drum ,1 year once opened and resealed.
  • Common uses: Filling large cracks or holes before applying final membrane.

FLAMENCO STANDARD

This is a black liquid of creamy consistency with extremely high solid content. Flamenco contains a proportion of latex and other flexible agents, giving a high degree of elasticity.
Standard Flamenco is ideal for application on to metal, concrete, cement render, asbestos, stone, roofing felt. The coating may be applied on to damp surfaces and can successfully bridge gaps of up to 5mm (1/4 inch). Larger gaps may be bridged using Flamenco Scrim over coated with Flamenco Standard.

  • Product Packaging: 10 kg printed drums.
  • Application: Drum: Brush, spray. Stir contents of drum vigorously to ensure all filling materials evenly dispersed.
  • Application Temperature: 20°C – 90°C. No cracking occurs after long exposure to low of –20°C and high of 50°C.
  • Applied Temperature: -20°C – 90°C.
  • Coverage Rate: 11/2 – 2m2/kg (up to 21/2m2/kg on metal, 1-11/2m2/kg on roofing felt).
  • Drying/Curing Time: 12 hours (full cure 2-3 days). Product not affected by rainfall before drying.
  • Storage: Several years in unopened drum. 1-2 years once opened and resealed.
  • Chemical Resistance: Excellent resistance to most common inorganic acids and alkalis, salt solutions. Avoid contact with hot detergents, hydrocarbon solvents
  • Solar Reflectivity: In areas of strong sunlight, it is recommended to consider the use of Aluminium Flamenco.
  • Common uses: Waterproofing tanking of block walls below ground level, gutters, water tanks, (non potable) under grouted tiled concrete decks, underside steel containers etc.

FLAMENCO ALUMINIUM (UV STABLE)

  • Product Packaging: 10 kg printed drums.
  • Application: Drum: Brush, spray. Stir contents of drum vigorously to ensure all filling material evenly dispersed.
  • Application Temperature: 1°C – 39°C.
  • Applied Temperature: -20°C – 90°C.
  • Coverage Rate: 11/2 – 2 m2/kg (up to 21/2 m2/kg on metal, 1-11/2m2/kg on roofing felt).
  • Drying/Curing Time: 12 hours (full cure 2-3 days). Product not affected by rainfall before drying.
  • Insulative Properties: Flamenco Aluminium will reduce the internal temperature of a building by 9°C, compared with Flamenco Standard.
  • Storage: Several years in unopened drum. 1-2 years once opened and resealed.
  • Common uses: Common uses: Butyl Rubber, asbestos, concrete or steel roofs or gutters where continuous ponding water is present, block walls, flashings etc.**FLAMENCO PRODUCTS FIRE RATING.**
    Fire Resistance: Achieves EXT.F.AA designation in accordance with BS476: Part 3: 1958.
    (That is no penetration of flame within 1 hour and no spread of flame).