
These are some of the protective coatings stocked in New Zealand, but many more are available and can be specified on request.
769. DAMP PROOF ALKYD PRIMER.
Apply to damp rusty steel. Can be topcoated with acrylics or alkyds. 5200. DIRECT TO METAL, ACRYLIC GLOSS/ SATIN FINISH ENAMEL. Single component, available in a range of colours. Apply direct to steel, as a top coat, or over existing coatings and masonry.

3100. FAST DRY, DIRECT TO METAL, ACRYLIC ENAMEL.
Single component, available in a range of colours. Apply to machinery, handrails, structural steel and many more places.
3700. DIRECT TO METAL, GLOSS ACRYLIC ENAMEL.
Single component, available in a range of colours. Can be applied @ 95% RH, and will cure down to 20 C. Apply to machinery, handrails, structural steel, masonry and other surfaces.
HS.9300: FAST DRY EPOXY PRIMER.
One Hour recoat time, @ 65 microns DFT. to abrasive blasted or slightly rusted steel.
9100: HIGH PERFORMANCE, HIGH BUILD, DIRECT TO METAL, GLOSS FINISH, EPOXY.
Apply direct to new steel, concrete floors, swimming pools, machinery or as a maintenance coating. Extends excellent corrosion and abrasion resistance.
9400: HIGH PERFORMANCE, HIGH GLOSS POLYURETHANE TOPCOAT.
Apply as a UV stable topcoat for 9100, to trucks, machinery, structural steel. Long-term gloss retention, the highest level of corrosion protection of all Polyurethanes available. Can also be applied as a gloss topcoat for epoxy floor coatings.
9800: HIGH PERFORMANCE, HIGH BULD, DIRECT TO METAL, HIGH GLOSS POLYURETHANE MASTIC.
Apply as a UV stable topcoat, over HS9300/9100 epoxy primers, or in mild to moderate corrosion environments, can be applied directly to prepared steel. At 60% volume solids, this coating can be spray applied @ 125 microns DFT In a single coat. Has good flexibility and extends excellent corrosion protection in severe Environments, when applied as a topcoat to these primers.
| site-map | web-partners | web-links |
Powered by NZWD